Overview
High-speed lines need tape that grabs fast and runs long. A BOPP self-adhesive tape jumbo roll gives you large meterage and steady performance. When you prepare an RFQ, keep the size numbers simple and consistent so suppliers can quote apples-to-apples.
Key Sizes for RFQs
Total thickness: 38–65 μm
Jumbo roll length: 4000–6000 m
Jumbo roll width: 980–1620 mm
These three items are enough to plan the slit pattern, estimate yield, and set changeover timing.
Adhesive Options and Simple Rules
Acrylic: clean, clear, steady over time; ideal for printed tape and long storage.
Hot-melt: high initial tack in cool rooms; best for fast case sealers.
Natural rubber: strong bite on rough or dusty cartons; high shear for heavy loads.
If your dock is cold or damp, start with hot-melt. If the board is rough, try natural rubber. If you need color-true, low-odor print tape, acrylic is a good fit.
Waterproof Behavior
The film resists moisture; the final seal depends on how well the adhesive meets the board.
Keep surfaces dry and dust-free.
Use firm pressure at flap corners.
Allow time for the bond to build before stacking.
In high humidity, condition the tape near the line to avoid temperature shock.
Where Jumbo Rolls Are Used
Carton sealing for 3-flap and 6-flap boxes
Branded tape with warnings or logos
Color tape for picking and zone marking
Stationery and light-duty office rolls
Large e-commerce hubs prefer long meterage to cut downtime. Cold warehouses prefer hot-melt for instant grab. Food plants often use low-odor acrylic.
Quality Assurance
Ask for adhesion, shear, elongation, noise level, and a COA per lot. Keep simple pass/fail ranges. Test both your slowest and fastest sealers.
Fast Line Fixes
Clean the path; dust ruins adhesion.
Replace dull blades.
Raise wipe-down pressure if flags appear.
Pre-warm rolls in winter or switch to hot-melt.
Buyer Checklist
38–65 μm total thickness
4000–6000 m jumbo length
980–1620 mm jumbo width
Adhesive: acrylic / hot-melt / natural rubber
COA per lot; short pilot run before full order
Recommended Manufacturers and Converters
Conclusion
Set the three size points, match the adhesive to your climate and carton, and run a short test. This approach produces fewer surprises and stronger, cleaner seals.
