Rice Paper Tape Masking Film Roll

Adhesive Masking Paper
automotive paint masking paper
paper masking
pre taped masking paper
Adhesive Masking Paper
automotive paint masking paper
paper masking
pre taped masking paper
  • Construction: Rice/Washi paper tape backing + PE/HDPE cover film
  • Backing: Thin, flat paper; grade varies by SKU
  • Adhesive: Pressure-sensitive adhesive; chemistry by grade
  • Film: Clear or translucent, depending on specification
  • Widths: Tape width and unfolded film width specified separately
  • Roll format: Length, core, fold pattern and packaging by SKU

Rice paper tape masking film roll combines a narrow Rice/Washi paper tape edge with PE or HDPE cover film in one pre-taped assembly. The tape edge defines the paint boundary, while the film protects adjacent panels during spraying. It is intended for smooth, clean, fully cured finishes where a fine line matters more than heavy-duty anchoring, including automotive refinishing, cabinet finishing, furniture coating and trim. Confirm adhesive chemistry, film treatment, dimensions and removal limits for the exact grade before production use.

The Tape Edge and Cover Film Have Different Jobs

Rice/Washi paper forms the narrow adhesive edge; PE/HDPE film covers the surrounding area. Unlike pre-taped masking paper, where kraft paper is the cover, this Washi-taped masking film uses paper as backing. Specify backing thickness, film thickness and finished assembly thickness separately. AOBERIS TAPE should confirm each detail against the approved SKU specification.

Where This Format Is Useful?

  • Automotive refinishing: Define an edge on a compatible, cured panel while the film covers adjacent areas.
  • Furniture coating: Mask finished faces during repairs or colour changes; test first on sensitive lacquer.
  • Cabinet fronts and trim: Protect smooth painted or lacquered faces where edge placement matters.
  • Multi-colour spraying: Separate colour zones without positioning a separate loose sheet.

Benefits

  • A defined edge: The tape can support a fine paint line when pressed evenly onto a suitable surface.
  • One attached assembly: Tape and cover film are dispensed together, reducing separate placement steps.
  • Coverage matched to the job: Select film width separately from tape width to suit the panel.
  • Controlled removal: Match adhesive and dwell time to reduce residue and coating-lift risks.

How Can Paint Bleed Under the Tape Edge Be Reduced?

Apply the tape to a clean, dry panel, pressing firmly at corners, joins and shallow recesses. Unfold film gradually to avoid pulling the edge out of position. Dust, wrinkles or a bridged recess can let paint creep underneath. Test with the actual coating and drying cycle; film treatment cannot correct a poorly sealed edge.

Technical Data Sheet (TDS)

Complete this TDS only with approved SKU records or test reports. Do not use competitor figures as AOBERIS TAPE data.

ParameterSKU specification / measured result
Cover film materialConfirm PE or HDPE grade
Film thickness (um)Enter measured value and tolerance
Finished assembly thickness (um)Enter measured value and tolerance
Rice/Washi backing thickness (um)Enter measured value and tolerance
Adhesive typeApproved SKU specification
Peel adhesion (N/25 mm)Result, substrate, method and conditioning
Unfolded film width (mm)Available sizes and tolerance
Tape width (mm)Available sizes and tolerance
Roll length (m)Available sizes and tolerance
Core inner diameter (mm)Confirmed core size
Clean-removal window (h)Validated coating, dwell and removal conditions
Film surface treatmentState only if verified for the grade
Film attachment methodConfirm whether electrostatic cling applies

Selecting Tape Width, Film Width and Roll Length

Choose film width to cover the area and roll length to suit the job and dispenser. Tape width should secure the edge without covering excess finish. Clarify whether quoted width means total, film or usable width. Record core, fold pattern, orientation, tolerances and packaging.

Qualifying Adhesion on Smooth, Cured Finishes

Test on a panel with the same coating and cure state. Apply with production pressure, leave for the planned dwell time, then remove consistently. Record temperature, humidity, residue and coating lift. Heat, moisture, incomplete cure and long dwell can change adhesion. State removal limits only when SKU tests support them.

Rice/Washi, Crepe and Duct-Tape Film: Choose by the Job

DimensionRice/Washi tape filmCrepe tape film
BackingThin Rice/Washi paperCreped paper
ConformabilitySmooth profilesOften better around curves
Paint-line sharpnessFine edge with even pressureDepends on grade and application
Surface typeSmooth, cured finishes; test firstGeneral masking; test first
RemovalDepends on adhesive and dwellDepends on adhesive and dwell

For a different tape backing in the same attached-film format, compare crepe paper tape masking film; for rough-surface edge-holding checks, consult the separate duct tape masking film guide.

FAQ

Is Rice/Washi paper the covering layer?

No. Rice/Washi paper forms the adhesive tape edge; PE/HDPE film covers the surrounding area.

Does every grade include corona treatment or electrostatic cling?

No. Confirm surface treatment and attachment method in the specification for the exact SKU.

Can the roll be removed residue-free from every painted surface?

No universal guarantee applies. Test the selected adhesive on the actual coating and planned dwell time.

Which dimensions should be confirmed before ordering?

Confirm film grade, film and finished thickness, tape and film widths, roll length, core and tolerances.

Scroll to Top

Get A Free Quote Now !

Contact Form Demo (#3)