Residue Free Gaffer Tape
OPALUS PACK manufactures residue free gaffer tape for stage, studio, event, and production teams that need temporary holding with cleaner removal. This removable adhesive gaffer tape combines matte cloth backing with low residue rubber adhesive for cable runs, floor marking, and short-term production work. Clean removal is checked on clean dry surfaces with slow low-angle peeling, but results still depend on surface, dwell time, heat, humidity, and removal method.
- Standard width: 24mm, 48mm, 50mm, 72mm, or custom slit width
- Standard length: 25m, 27m, 30m, 50m, or project-based roll length
- Backing: matte PE-coated cloth or coated cotton cloth backing
- Adhesive: low residue rubber adhesive for short-term clean removal
- Colors: black, white, grey, red, yellow, green, blue, or custom colors
- Use type: indoor stage floors, studio floors, event cable runs, temporary marking
Product Overview
Residue free gaffer tape is made for jobs where the tape must hold during setup and come away cleanly after removal. It is not heavy duty duct tape for permanent repair, aggressive patching, or long outdoor bonding. The focus is short-term adhesion on common stage floors, sealed studio floors, exhibition areas, AV setups, and production spaces where cable hold-down and controlled removal matter.
OPALUS PACK produces this low residue gaffer tape with a matte cloth backing that helps reduce glare under stage lamps, studio lighting, and cameras. The backing tears by hand, while the adhesive grips cable paths, floor marks, road cases, and light temporary items. In typical factory checks, sealed PVC floor panels and coated stage floor samples are reviewed after 24 h and 72 h indoor dwell references. Slow low-angle peeling usually shows cleaner removal than quick upward pulling on the same surface. Aged paint, weak coatings, plasticized flooring, lacquered wood, dusty concrete, and fresh paint should be tested first.
Benefits
- Supports cleaner removal from common stage floors when the surface is clean, dry, and stable.
- Low residue rubber adhesive balances temporary holding strength with reduced adhesive transfer risk.
- Matte cloth backing lowers unwanted glare in theaters, studios, film sets, and live production areas.
- Works as a temporary cable hold-down tape for AV cables, lighting cables, and event floor runs.
- Controlled unwind and hand tearable backing help long strips apply with less stretch, curl, or edge lift.
When Should This Tape Be Removed for Better Clean Removal?
For better clean removal, the tape should be removed soon after the temporary setup is finished, especially on rented floors, painted areas, coated surfaces, or unknown substrates. Common sealed stage floors usually perform better under short indoor dwell conditions than under extended placement. In factory sample checks, 24 h and 72 h references are used to review peel feel, visible residue, and surface change. Heat, humidity, foot traffic, and longer dwell time may increase residue risk.
TDS
| Item | Typical Value |
|---|---|
| Product Type | Residue free gaffer tape for temporary indoor holding |
| Backing Material | Matte PE-coated cloth or coated cotton cloth |
| Adhesive Type | Low residue rubber adhesive |
| Total Thickness | 260um – 330um typical factory test range |
| Standard Width | 24mm, 48mm, 50mm, 72mm, custom slit width |
| Standard Length | 25m, 27m, 30m, 50m, custom roll length |
| Peel Adhesion to Steel | 6 – 10 N/25mm typical reference value |
| Holding Power | 8 – 24 h typical reference, not for permanent fixing |
| Tensile Strength | 70 – 110 N/25mm typical factory test range |
| Surface Finish | Matte, low-gloss, non-reflective cloth surface |
| Cable Hold-Down Check | No obvious edge lift in short indoor sample trial |
| Recommended Dwell Time | 24 – 72 h test reference on sensitive surfaces |
| Removal Test Condition | Clean dry surface, room temperature, slow low-angle peel |
| Residue Observation | Depends on surface, dwell time, temperature, and removal method |
Applications
- Temporary cable hold-down on sealed theater stage floors and studio floors.
- Cable path organization for AV setups, lighting control areas, and production rigs.
- Floor marking for film sets, TV studios, exhibition booths, and live event layouts.
- Short-term labeling on road cases, stands, props, and backstage fixtures.
- Temporary edge holding for carpets or floor coverings after surface compatibility testing.
How Can Surface Preparation Reduce Residue Risk During Cable Hold-Down?
Clean removal starts before the tape is applied. The surface should be dry, firm, and free from dust, oil, wax, moisture, loose paint, and old adhesive marks. When using this removable adhesive gaffer tape for cable hold-down, press the tape along both sides of the cable path without overstretching the backing. On aged paint, lacquered wood, fragile coatings, plasticized PVC, or freshly painted areas, apply a small test strip first and check adhesion, removal feel, edge lifting, and residue observation.
FAQ
Can residue free gaffer tape be removed without adhesive marks?
It is made for cleaner removal on common stage floors, but results depend on surface condition, dwell time, temperature, humidity, and peeling method.
Is this tape the same as heavy duty duct tape?
No. It is made for temporary holding and cleaner removal, not stronger repair-style bonding.
What surfaces need extra caution before application?
Aged paint, fresh paint, lacquered wood, fragile coatings, plasticized surfaces, dusty concrete, and unknown rental floors should be tested first.
How should the tape be removed?
Remove it slowly at a low angle under normal room conditions. Avoid fast upward pulling on painted or delicate surfaces.