Barrier Tape Red White

Product Overview

Red White Caution Tape is a non-adhesive PE / LDPE barrier film for temporary perimeter marking where the red-white stripe itself is the main visual cue. It is suited to construction areas, utility or road maintenance, equipment service zones, temporary pedestrian routing, and other locations where the boundary may be moved or removed as work progresses.

The published 0.05-0.12 mm film range should be selected together with roll length, wind exposure, fixing method, handling frequency, and required visibility. The color pattern does not by itself define hazard severity; where the site needs an explicit signal word or access instruction, use the appropriate printed warning system. For broader selection logic, see Safety Barrier Tape: A Comprehensive Guide. This range keeps the roll light enough for quick handling while giving the film enough body for tying, hanging, and temporary outdoor separation. The 75mm width is a practical industrial size: wide enough to be seen from a distance, but still easy to pull, knot, and install between cones, posts, scaffolding, or temporary fencing.

As a red white barricade tape, the product is useful when the boundary may change during the day. It can be removed or repositioned without adhesive residue, which matters around equipment repair zones, finished floors, temporary walkways, and site entrances.

Benefits

• Red-white contrast gives a clear boundary signal for short-term restricted areas, helping separate people from repair work, excavation edges, or unsafe pathways.
• Non adhesive PE film can be tied or fixed in place without leaving residue on walls, equipment, floors, or temporary supports.
• 75mm x 100m rolls are convenient for smaller maintenance tasks, while 75mm x 500m rolls reduce roll changes during larger perimeter marking work.
• Typical tensile strength of 18-30 MPa helps the tape stay stable during normal installation between cones, posts, and site barriers.
• Elongation of 150-300% allows the film to absorb light stretching during setup without breaking too easily under normal handling.
• Stripe alignment and color consistency are checked during production, so repeated orders keep the same red-white recognition across large work areas.

What Is Red White Caution Tape Best Used For?

Red-white striped tape is best used as a temporary visual perimeter when the site needs fast separation without adhesive bonding. It can define a changing work boundary, redirect pedestrian movement, or make a temporary restricted line easier to notice. If the hazard requires a specific DANGER, CAUTION, DO NOT ENTER, or other instruction, the printed message and supporting site controls should provide that meaning rather than relying on stripe color alone. especially around excavation work, repair zones, restricted pathways, and temporary construction boundaries. Its value is not only the color itself, but the speed of setting up a visible boundary without installing a fixed fence.

TDS / Technical Data Sheet

Applications

• Temporary construction site boundary marking
• Road maintenance and utility repair area separation
• Outdoor warning tape for short-term perimeter control
• Warehouse maintenance zones and restricted aisle marking
• Excavation, trench, and equipment repair area identification
• Facility shutdown areas where access needs to be controlled
• Event access control and temporary crowd direction
• Equipment service zones where fixed barriers are not required
• Temporary safety barrier tape for frequently changing work areas

How Does Non Adhesive Barrier Tape Perform Outdoors?

For outdoor use, the performance of a temporary safety barrier tape depends on film thickness, installation tension, sunlight exposure, and how long the boundary needs to remain in place. Standard polyethylene warning tape works well for short-term outdoor marking, while UV-stabilized grades are better for repeated or longer exposure. In windy areas, the tape should be fixed with enough slack to reduce tearing while still keeping the red-white pattern visible. For open perimeters, 500m rolls are usually more efficient because fewer roll changes are needed during continuous installation.

FAQ

Is barrier tape red white adhesive or non adhesive?

It is normally supplied as a non adhesive PE or LDPE roll film. It is designed to be tied, wrapped, or fixed between temporary supports rather than stuck to a surface.

What roll size is commonly used for red white barrier tape?

The most common industrial options are 75mm x 100m and 75mm x 500m. Shorter rolls are easier for small maintenance tasks, while 500m rolls are more efficient for larger perimeter layouts.

Can this polyethylene warning tape be used outdoors?

Yes. It can be used outdoors for temporary marking. For longer sunlight exposure, UV-stabilized film is recommended to help maintain color visibility.

What should be checked before bulk supply?

Important checks include film thickness, tensile strength, roll length tolerance, stripe clarity, roll winding, and batch-to-batch color consistency.