Double Sided Cloth Tape Jumbo Roll
OPALUS PACK is a manufacturer of double sided cloth tape jumbo roll for converters producing carpet tape, mounting tape, and temporary installation rolls. The tape uses a double sided cloth carrier, adhesive on both sides, and a controlled release liner for steady unwinding and width cutting. Factory checks focus on adhesive coat weight, liner release force, roll hardness, and cut-edge condition because these details affect finished roll production.
- Backing: double sided cloth carrier
- Adhesive: rubber, hot melt, or acrylic options
- Liner: siliconized paper, PE film, or PET film
- Jumbo width: 1040mm, 1060mm, 1260mm, or customized
- Color: white, yellowish, brown, black, or specified
- Use: carpet tape and mounting tape converting
Product Overview
A double sided cloth tape jumbo roll is made for slitting and converting, not for the same purpose as single sided duct tape jumbo roll. Its structure is a cloth carrier double sided tape base, with pressure-sensitive adhesive coated on both sides and a release liner protecting one side before rewinding. This gives the tape flexibility, tensile support, and better contact on textile backing, exhibition carpet, or slightly uneven mounting surfaces.
First-touch tack is only one part of selection. The two adhesive layers need to remain balanced after coating, rewinding, and cutting. In sample roll observation, uneven adhesive coat weight may create edge bleeding after storage, while unstable liner release may cause liner lift, tight unwind, or edge movement during narrow roll production. Rubber adhesive is often used for faster initial tack, hot melt for strong grab and efficient coating, and acrylic for cleaner aging or special substrate needs.
Benefits
- Double coated cloth tape jumbo roll construction supports log roll rewinding and narrow roll slitting.
- Balanced adhesive coat weight helps reduce adhesive overflow and edge bleeding after cutting.
- Controlled liner options support smoother unwind during carpet tape converting and mounting tape converting.
- Double sided fabric tape jumbo roll production can be adjusted by cloth thickness, tack, liner type, and winding hardness.
- Typical slitting tolerance is checked around +/-0.5mm, with tighter control confirmed by specification.
- A 24-72h surface pre-test is recommended for coated floors, PVC floors, wood finishes, and sensitive surfaces.
How does the release liner affect double sided cloth tape jumbo roll converting?
The release liner does more than cover the adhesive. It affects unwind, adhesive protection, and roll stability during cutting. In a typical liner release force check, the reference range may be 10-60 gf/25mm, depending on liner paper, film type, and adhesive formulation. If release is too tight, the adhesive surface can be disturbed during stripping. If release is too light, the liner may shift during rewinding or lift at the roll edge.
TDS
| Item | Typical Value |
|---|---|
| Carrier | Cotton cloth, woven cloth, or PET-cloth carrier |
| Adhesive Options | Rubber adhesive, hot melt adhesive, acrylic adhesive |
| Adhesive Coat Weight | Typical factory range 80-180 g/m2 per side |
| Total Thickness | 180-500 um, depending on carrier and coating |
| Release Liner | Siliconized paper, PE film, PET film |
| Liner Release Force | Typical reference 10-60 gf/25mm |
| Jumbo Roll Width | 1040mm, 1060mm, 1260mm, or customized |
| Jumbo Roll Length | 300m-1000m, depending on roll weight |
| Peel Adhesion Reference | 6-18 N/25mm on steel |
| Holding Power Reference | >=24h under sample test conditions |
| Slitting Tolerance | Typical +/-0.5mm, confirmed by specification |
| Roll Stability Check | Unwind tension, roll hardness, edge bleeding, liner lift observation |
Applications
- Carpet tape converting for exhibition flooring, temporary carpet hold-down, and floor covering installation rolls.
- Mounting tape converting for textile, leather, rubber, plastic sheet, and industrial assembly rolls.
- Flexographic plate mounting where cloth support and shear resistance are required.
- Narrow-width slitting for distributors that need finished double sided fabric tape jumbo roll conversion.
What should be checked before slitting double sided cloth tape jumbo roll into finished rolls?
Before width cutting, converters should confirm more than the final roll size. Cloth carrier thickness, adhesive coat weight balance, liner thickness, winding hardness, and open-side tack all influence the result. During sample slitting checks, OPALUS PACK observes whether the edge stays clean, whether adhesive bleeding appears after 24h rewound storage, whether the liner shifts, and whether narrow rolls unwind evenly. For mounting tape converting, clean edges and controlled width accuracy help avoid adhesive overflow during laminating or assembly.
FAQ
Is double sided cloth tape jumbo roll the same as duct tape jumbo roll?
No. Duct tape jumbo roll is usually single sided. Double sided cloth tape jumbo roll has adhesive on both sides and uses a release liner for converting and slitting.
Which adhesive type is suitable for carpet tape converting?
Rubber or hot melt adhesive is often used for higher initial tack. Acrylic adhesive may be selected for cleaner aging or specific substrate requirements.
Can this tape be used on all floor surfaces without residue?
No. Coated floors, PVC floors, wood finishes, and sensitive surfaces should be tested before larger-scale temporary installation.
What specifications should be confirmed before production?
Confirm jumbo roll width, total thickness, adhesive coat weight, liner type, liner release force, slitting tolerance, roll length, and finished roll use.