Natural Rubber Carton Sealing Tape










AOBERIS TAPES is a manufacturer of natural rubber carton sealing tape for corrugated boxes that are hard to seal with general packing tape. This product uses BOPP/PP backing and natural rubber adhesive to give high initial tack on recycled cartons, rough kraft paper, high-ink printed boxes, subject to trials on clean, dry surfaces. Cold or humid applications require separate grade-specific qualification. It is developed for medium and heavy cartons where flap rebound, edge lifting, and center seam opening must be controlled.
- Material: BOPP/PP film with natural rubber adhesive
- Width: 48 mm, 50 mm, 72 mm, custom slit widths
- Length: 50 m, 66 m, 100 m, 1000 m machine rolls
- Color: Clear, tan, brown, custom color available
- Thickness: 45 um-74 um typical factory test range
- Use: Recycled cartons, rough boxes and heavy cartons after surface preparation and application trials
Product Features and Benefits
Product Overview
Natural Rubber Carton Sealing Tape is intended for corrugated cartons where surface condition makes reliable closure more difficult. Recycled linerboard, rough kraft paper, printed surfaces, and variable paper fibers can affect how well an adhesive contacts the carton. This BOPP tape uses a solvent-based natural rubber adhesive system and should be qualified on the actual carton construction, with particular attention to initial contact, flap rebound, and edge lifting after sealing.
AOBERIS TAPES uses a solvent natural rubber adhesive system that gives fast grab after hand or machine pressure is applied. On rough kraft flaps and high-recycled content cartons, the adhesive can contact uneven paper fibers instead of only touching the top surface. Remove loose dust and allow the carton surface to dry before sealing. Compare grades on the prepared carton; no documented comparative test is provided here to establish superior bonding on contaminated flaps.
The BOPP/PP film backing gives strength without making the tape overly stiff. Typical factory testing shows 23-42 lb/in tensile strength and 120%-175% elongation, depending on film thickness and adhesive coat weight. For heavy carton sealing, carton weight, flap tension, adhesion, holding power, and application pressure should be checked together. A thick tape alone does not solve center seam failure if the carton surface is weak or damp.

Benefits
- High initial tack helps the tape grab recycled corrugated cartons before flaps spring back.
- Evaluate natural rubber adhesive on clean, dry rough paper and high-ink printed flaps; remove loose dust before application.
- BOPP/PP backing supports medium and heavy box sealing without excessive stiffness.
- Adhesion to steel is typically 21-26 oz/in as a reference value.
- Holding power of >=24 h helps evaluate resistance to flap rebound.
- Smooth unwind supports hand dispensers and automatic case sealing machines.
- Clean slitting edges help reduce burrs, tape breakage, and unstable feeding.

How Should Natural Rubber Carton Sealing Tape Be Tested on Difficult Carton Surfaces?
Start with the carton liners used in the actual packing operation. Evaluate high-recycled-content paper, rough kraft surfaces and heavily printed areas separately. Remove dust or other loose contamination and dry the surface before applying tape; contamination is a preparation issue, not a qualified bonding surface.
Apply the tape with the intended width and normal dispenser or machine pressure. Use the natural-rubber carton tape application checks guide to plan a sample trial on clean, dry cartons, with cold-storage suitability confirmed for the supplied grade. Check initial contact on the carton liner, then inspect the seal for edge lifting, center-seam opening, and flap rebound after handling.
If the seal fails, examine whether the problem comes from insufficient application pressure, loose surface fibers, dust, moisture, or the adhesive grade itself. Increasing tape thickness alone may not correct a poor bond to the carton surface.
Confirm the selected construction through a carton trial before bulk approval, particularly when the same tape will be used across different recycled-board suppliers or printed carton finishes. Use the carton-seal trial worksheet to record the board, application pressure, dwell and observed failure mode.

TDS / Technical Data Sheet
| Item | Typical Value |
|---|---|
| Product Type | Natural rubber carton sealing tape |
| Backing Material | BOPP/PP film backing |
| Adhesive Type | Solvent natural rubber adhesive |
| Total Thickness | 45 um-74 um typical factory test range |
| Film Thickness | 25 um-50 um typical reference value |
| Adhesion to Steel | 21-26 oz/in typical reference value |
| Holding Power | >=24 h typical reference under standard lab condition |
| Tensile Strength | 23-42 lb/in typical factory test range |
| Elongation at Break | 120%-175% typical reference value |
| Common Size | 48 mm, 50 mm, 72 mm x 50 m, 66 m, 100 m, or 1000 m |
| Application Method | Hand dispenser, semi-automatic sealer, automatic case sealer |
| Suitable Cartons | Clean, dry recycled, rough or high-ink cartons; qualify medium and heavy loads by carton trials |

Applications
- Recycled corrugated cartons with loose fibers or uneven kraft surfaces
- Heavy cartons where flap memory may cause center seam opening
- High-ink printed cartons where surface contact is less reliable
- Warehouse cartons after removing loose dust and contamination and confirming a dry surface
- Cold storage transfer cartons and refrigerated transport preparation
What Should Be Checked Before Using This Tape in Cold or Humid Conditions?
For refrigerated transport, low-temperature storage, or humid packing rooms, tape performance should be checked on the actual carton, not only by tape thickness. The result depends on carton moisture, application pressure, dwell time, and storage temperature. Procurement teams usually review adhesion to steel as a reference value, then test recycled cartons or heavy boxes with strong flap memory. A stable seal should resist edge lifting, center seam opening, and flap rebound after stacking or transport vibration.
FAQ
Is natural rubber carton sealing tape the same as ordinary carton tape?
No. Both may use film backing, but this tape uses natural rubber adhesive for evaluation on clean, dry recycled, rough, high-ink or heavier corrugated cartons.
Can this tape be used on recycled corrugated cartons?
Yes. It suits recycled corrugated cartons where loose fibers require high initial tack and better adhesive contact after pressure is applied.
Is this tape suitable for heavy cartons?
Yes. AOBERIS TAPES recommends selecting thickness, backing strength, and adhesive coat weight according to carton weight and flap tension.
Should samples be tested before bulk use?
Yes. Test on actual clean, dry cartons. Remove loose dust before sealing and qualify cold, humid, high-ink or heavy-load conditions separately.