Abrasive Anti Slip Tape
OPALUS PACK manufactures abrasive anti slip tape for industrial stair fronts, warehouse walkways, loading docks, access ramps and high-traffic work zones where a sharp grit surface is required. This industrial grit safety tape uses coarse mineral particles bonded to a PET or PVC carrier, helping safety boots maintain traction on prepared metal, concrete, wood or painted floors. It is a heavy-duty abrasive surface product, not a smooth grip strip or household safety sticker.
- Widths: 25mm, 50mm, 75mm, 100mm
- Lengths: 5m, 10m, 18.3m, custom
- Surface: coarse mineral grit
- Backing: PET or PVC carrier
- Colors: black, yellow-black, gray
- Areas: stair fronts, ramps, docks, walkways
Key Features of Our Non Skid Tape
Product Overview
Abrasive anti slip tape is used where footwear first loses contact: stair nosing, ramp entrances, dock plate edges, machine platforms and turning points. Unlike general non slip tape or anti slip grip tape, this product is built around a rough mineral-coated surface rather than a soft texture.
The working layer can use aluminum oxide, silicon carbide or quartz sand, selected by grit grade, traffic load and surface condition. Standard grit suits warehouse lanes and general step edges. Coarse grit traction tape is better for steel stairs, loading ramps and dusty routes where smaller textures may feel weak.
A PET or PVC carrier supports the abrasive layer, while acrylic adhesive bonds to a clean dry substrate. OPALUS PACK can confirm backing thickness, grit feel, slit width, roll length, liner and color against retained samples. For critical positions, a sample strip, 24-hour adhesion review and one working-shift traffic check can reveal edge lifting, poor wet-out or ramp-entry wear.
Benefits
- High friction surface improves grip on stair fronts, ramps and industrial walkways.
- Coarse mineral grit gives stronger bite under safety boots and work shoes.
- Suitable for heavy foot traffic where smooth tape surfaces can polish or wear quickly.
- PET or PVC carrier supports stable slitting, roll handling and die-cut tread production.
- Acrylic adhesive bonds to cleaned metal, concrete, wood and painted floor surfaces.
- Yellow-black color combines traction with visible marking at dock and step edges.
- Sample testing reviews grit retention, edge lifting and adhesive wet-out.
How Should Grit Level Be Selected for Industrial Walkways, Stairs and Ramps?
Grit level should match traffic load, contamination risk and the exact risk point. Standard abrasive grit is enough for indoor warehouse lanes and general stair edges. Coarse mineral grit is better for ramp entrances, loading dock edges, steel steps and dusty areas where debris may reduce shoe contact. In heavy-duty zones, trial traffic should check grit retention, edge lifting and adhesive contact because actual floor conditions matter more than catalog wording.
TDS / Technical Data Sheet
| Item | Typical Value |
|---|---|
| Product Type | Abrasive anti slip tape with grit-coated safety surface |
| Surface Layer | Aluminum oxide, silicon carbide, quartz sand or confirmed mineral grit |
| Grit Grade | Standard grit, coarse grit or heavy-duty grit by application |
| Backing Material | PET film or PVC film carrier |
| Adhesive Type | Pressure-sensitive acrylic adhesive / solvent acrylic adhesive option |
| Total Thickness | About 600um-1200um, grade-dependent |
| Common Width | 25mm, 50mm, 75mm, 100mm / custom slit width |
| Roll Length | 5m, 10m, 18.3m / custom roll length |
| Color Options | Black, yellow-black, gray, white, custom color |
| Release Liner | Paper liner or film liner by production requirement |
| Peel Adhesion Check | Confirm by 180-degree peel test when required |
| Installation Check | Roller pressure, edge pressing, 24-hour adhesion review |
| Traffic Trial | One working-shift sample strip check before repeat order |
| Inspection Items | Grit retention, edge lifting, stair-front wear, ramp-entry wear |
| Supply Format | Finished rolls, slit rolls, die-cut treads, OEM package |
Applications
- Industrial stair nosing and step fronts where first-foot contact needs strong grip.
- Warehouse walkways with frequent turning and pallet-side movement.
- Loading dock edges, dock plates and ramp entrances.
- Factory maintenance routes, machine access paths and pedestrian lanes.
- Service platforms, ladders, equipment steps and metal access panels.
- Covered industrial passages where abrasive traction matters more than appearance.
When Is Abrasive Anti Slip Tape More Suitable Than a Smooth or Non-Abrasive Surface?
Abrasive anti slip tape is more suitable when the main requirement is mechanical grip under work shoes, safety boots, hand trucks or frequent industrial foot traffic. Smooth textured surfaces may work in light-duty decorative areas, but they usually cannot provide the sharp contact points needed on warehouse ramps, metal stairs, machine platforms or transition zones. The mineral-coated surface gives workers a clear traction feel at stair fronts and sloped access paths. Adhesive wet-out, edge lifting and grit retention should be checked before approval.
FAQ
1. Can abrasive anti slip tape be used on concrete stairs?
Yes. Apply it to clean, dry and sound concrete. For dusty concrete, test a small strip first to check contact, edge lifting and grit wear.
2. How is this different from general anti slip grip tape?
This product focuses on abrasive mineral grit and industrial traffic. General grip tape covers broader stair use; this tape targets heavy-duty routes and safety boots.
3. Does the tape need special surface preparation?
Yes. Remove dust, oil, loose coating and moisture. Roller pressure and edge pressing help adhesive wet-out on stair fronts and ramp entries.
4. Can the product be supplied in custom sizes?
Yes. Width, length, grit grade, backing, color, liner and die-cut format can be confirmed by installation area and retained sample.