Shiny Film PVC Electrical Tape
OPALUS PACK manufactures shiny film PVC electrical tape for glossy PVC film converting, industrial insulation supply, and OEM slit roll production. This product is not positioned as a general color electrical tape; it is built for customers who need a smooth shiny surface, stable adhesive coating, and log roll format for downstream processing. The tape uses soft PVC film with rubber-based pressure sensitive adhesive. In factory checks, PVC film thickness is typically controlled at 0.11 – 0.18 mm, with peel adhesion around 1.5 – 2.2 N/cm before slitting.
- Material: soft PVC film with rubber-based adhesive coating
- Surface: shiny gloss finish, matte finish optional
- Thickness: 0.11 – 0.18 mm typical PVC film range
- Roll form: 1250 mm log roll for slit roll converting
- Colors: black, white, red, blue, yellow, green, or OEM colors
- Supply option: custom width, length, core, and private label format
Product Features
Product Overview
This shiny film PVC electrical tape is designed for converting-focused electrical insulation supply, where surface consistency and roll handling are more important than color selection alone. OPALUS PACK produces it in master log rolls so tape processors can slit the material into 12 mm, 18 mm, 19 mm, 20 mm, or other required widths without changing the base film and adhesive system.
The glossy PVC surface gives the tape a bright appearance, but its practical value is production control. When adhesive coating is even, the surface reflection usually looks smooth across the roll. If dull bands, coating streaks, or uneven gloss appear, operators can identify potential coating or leveling issues before the roll reaches the slitting machine. This helps reduce unstable unwind, edge waving, and uneven roll tension during OEM conversion.
The adhesive layer uses a rubber-based pressure sensitive system. It gives enough tack for wire and cable wrapping while allowing controlled unwind from wide rolls. In typical testing, tensile strength is controlled around 20 – 28 N/cm, and elongation usually stays within 150 – 180 %. These values help the film stay flexible during wrapping and strong enough during rewinding.
Benefits
- Glossy PVC film surface makes coating appearance easier to check before converting.
- Rubber-based adhesive provides balanced tack for wire wrapping and controlled unwind.
- 150 – 180 % elongation helps the film conform around cable joints and curved harness areas.
- 20 – 28 N/cm tensile strength supports cleaner slitting and more stable rewinding.
- Dielectric strength of >= 40 kV/mm supports normal industrial insulation requirements.
- Log roll supply helps converters keep one base material for multiple slit roll sizes.
What should be checked before selecting a shiny PVC film tape for converting?
For converting work, sourcing teams should check more than color and roll length. Film thickness, peel adhesion, surface gloss consistency, unwind behavior, and slit edge condition all affect finished roll quality. A sample should be tested on the actual slitting equipment, because blade condition, rewind speed, and machine tension can change the final roll edge even when the base material looks correct.
TDS
| Item | Typical Value |
|---|---|
| Product Type | Shiny film PVC electrical tape |
| Film Material | Soft PVC film |
| Adhesive Type | Rubber-based pressure sensitive adhesive |
| PVC Film Thickness | 0.11 – 0.18 mm |
| Total Thickness | 0.13 – 0.20 mm |
| Peel Adhesion | 1.5 – 2.2 N/cm |
| Tensile Strength | 20 – 28 N/cm |
| Elongation | 150 – 180 % |
| Dielectric Strength | >= 40 kV/mm |
| Temperature Resistance | -10 – 80 C |
| Standard Log Roll Width | 1250 mm |
| Slit Roll Width | 12 – 50 mm customizable |
| Surface Finish | Shiny gloss, matte optional |
| Core Option | 38 mm or 76 mm paper core |
| Sample Observation | Smooth unwind, clean slit edge, stable gloss appearance |
Applications
- OEM slit roll converting for tape processors and private label production
- Electrical wire insulation in industrial assembly environments
- Automotive wire harness wrapping where flexibility and clean unwind are required
- Cable joint protection for low-voltage electrical systems
- Electrical component bundling where controlled adhesion is needed
- Master roll supply for factories using several finished tape widths
How is this tape different from ordinary colored electrical tape?
Ordinary colored electrical tape is often selected for basic marking or general wrapping. This product is different because it is built around shiny PVC film quality, adhesive coating stability, log roll supply, and slit roll customization. The focus is on surface smoothness, controlled unwind, and OEM specification consistency, so converters can use one stable material platform for several finished tape widths.
FAQ
1. Is this tape mainly for color coding?
No. Color options are available, but the main focus is shiny PVC film, adhesive performance, and log roll converting.
2. Can OPALUS PACK supply master log rolls?
Yes. The standard supply format is 1250 mm log roll, with slit roll widths available by requirement.
3. What does the glossy surface indicate?
It gives a bright finish and helps show coating consistency during production inspection.
4. Can the specification be adjusted?
Yes. Thickness, adhesion level, color, width, core size, and label format can be adjusted after sample confirmation.