Gaffer Tape Matte Black
OPALUS PACK manufactures gaffer tape matte black for stage, film, studio, and event production work where low reflection, cable control, and clean temporary fixing are required. This non-reflective gaffer tape uses a matte black surface, cloth backing, and rubber adhesive to secure floor cables, mark camera positions, and reduce unwanted glare under studio lighting. Regular 48mm x 50m rolls, typical 10.5 mil thickness, smooth unwind, and low-residue removal can be matched to short-term production use.
- Regular size: 48mm x 50m, custom width and length available
- Color: matte black surface for low-reflection stage and studio work
- Backing: flexible cloth backing, hand tearable
- Adhesive: rubber adhesive for quick tack and controlled removal
- Thickness: typical 10.5 mil reference
- Main use: floor cable hold-down, camera marks, stage cues, temporary fixing
Features and Benefits
Product Overview
OPALUS PACK gaffer tape matte black is made for working areas where glossy black tape can still catch light. On dark stage floors, black scenery, AV cable paths, and camera-facing zones, even a narrow shiny tape edge may show under LED panels or studio spotlights. In a typical low-reflection surface observation, the matte coating shows less glare than glossy polyethylene surface tape when viewed from angled lighting positions.
The cloth gaffer tape structure supports fast, hands-on production work. Stage crews can tear it by hand, press it along cable edges, and apply it to slightly uneven floors without stopping for scissors. During a hand-tear edge check, the tape should break across the width with limited fraying, helping floor marks and cable paths stay neat.
The rubber adhesive is balanced for temporary hold rather than permanent repair. It gives quick initial tack on common stage boards, painted floors, metal stands, and selected cable jackets, while supporting controlled removal after short-term use. For painted floors, PVC flooring, delicate coatings, carpet edges, or high-plasticizer cable jackets, a small-area residue check is recommended before full application.
Benefits
- Low-glare surface: The matte black finish helps reduce reflection from stage lamps, LED panels, camera flashes, and studio spotlights.
- Cable edge control: In a cable edge lifting check, firm pressure along both sides helps the tape stay flatter during foot traffic.
- Cleaner temporary removal: Rubber adhesive gives fast tack and low-residue removal on many tested surfaces after short-term dwell time.
- Fast hand application: Cloth backing tears by hand during stage changes, camera moves, or AV setup.
- Neater floor marks: The low-sheen black finish marks camera positions, stage cues, and temporary floor paths without bright tape lines.
How does matte black gaffer tape control reflection under stage and studio lighting?
Matte black gaffer tape is useful in lighting-sensitive spaces because its non-reflective finish helps reduce glare from stage lamps, LED panels, camera flashes, and studio spotlights. Around black floors, dark scenery, tripod areas, cable paths, or camera marks, the matte black surface helps the tape blend into the working area instead of forming shiny highlights on camera. A low-angle light check can be used during sample confirmation.
TDS
| Item | Typical Value |
|---|---|
| Product Type | Matte black non-reflective gaffer tape |
| Manufacturer | OPALUS PACK |
| Backing Material | Cloth backing with matte surface coating |
| Adhesive Type | Rubber adhesive |
| Standard Color | Matte black |
| Standard Roll Size | 48mm x 50m / 50mm x 50m |
| Custom Width | 24mm, 36mm, 48mm, 50mm, 72mm, or custom slit width |
| Custom Length | 10m, 25m, 30m, 50m, or project roll length |
| Total Thickness | Typical 10.5 mil / about 0.27mm |
| Peel Adhesion Reference | 7-13 N/25mm, depending on surface and adhesive grade |
| Holding Power Reference | 24 h indoor static hold under sample test condition |
| Tensile Strength Reference | 90-140 N/25mm typical factory test range |
| Low Residue Removal | Low residue on most tested surfaces after short-term dwell time |
Applications
- Securing audio, video, and power cables on studio floors
- Creating camera marks, performer marks, stage cues, and temporary floor paths
- Reducing visible tape reflection on black stage floors and dark set areas
- Holding lightweight stage accessories, labels, and production notes
- Covering small shiny edges on stands, cases, scenery parts, or black set pieces
- Supporting theatre stages, film sets, TV studios, exhibitions, live events, and AV setup work
What should be checked before using it for cable securing and stage floor marking?
Before applying gaffer tape matte black on studio floors, stage boards, carpets, painted surfaces, or cable jackets, check surface condition, pressure, dwell time, and removal requirement. A typical factory sample check may include peel adhesion, holding power, unwind tension, hand-tear edge quality, cable edge lifting, and low-residue removal after a set test period. For floor cable hold-down, press the tape firmly along both sides of the cable.
FAQ
Is this tape the same as ordinary black duct tape?
No. It is made for matte, low-reflection stage and studio use, with focus on temporary fixing, floor cable hold-down, hand tearing, and low-residue removal.
Can the tape be removed without residue?
It removes with low residue on many tested surfaces, but material, dwell time, pressure, temperature, and coating condition can affect results. A small-area test is recommended.
What is the common specification for this matte black gaffer tape?
Common specifications are 48mm x 50m or 50mm x 50m with about 10.5 mil thickness. Width, length, thickness, core, and packaging can be customized.
Where is this tape mainly used?
It is mainly used for studio cable runs, camera position marks, temporary floor paths, dark set work, theatre stages, film sets, TV studios, and event production areas.