Barricade Tape Bio Hazard
OPALUS PACK manufactures barricade tape bio hazard products for temporary biological risk identification in laboratories, healthcare facilities, medical waste areas, and contamination control zones. Made from non-adhesive polyethylene tape, it uses repeated BIOHAZARD text and symbol printing to create a clear restricted boundary without leaving adhesive residue. The tape is designed for fast visual isolation during spill response, waste handling, cleaning work, and emergency access control.
- Common Size: 50 mm, 70 mm, 75 mm width
- Color: Yellow/black, red/white, or custom color
- Material: Non-adhesive PE film
- Printing: BIOHAZARD text and symbol
- Thickness: 0.025 mm – 0.035 mm
- Roll Length: 100 m, 200 m, 500 m
Product Overview
This biohazard warning tape is made for places where ordinary danger tape is not specific enough. Its purpose is not only to block access, but to make biological risk visible before people enter a restricted area. In labs, hospitals, testing rooms, and infectious waste handling points, the repeated BIOHAZARD message helps staff recognize possible exposure to contaminated materials, biological samples, or waste that needs controlled handling.
As a manufacturer, OPALUS PACK pays attention to practical details during production. The PE film can be tied around doors, posts, carts, waste bins, or temporary stands, while the non-adhesive structure avoids residue on controlled surfaces. Typical film thickness ranges from 0.025 mm to 0.035 mm, giving the roll a light weight without making the tape feel too fragile during installation. Printing is checked for readability after normal unwinding and hand tension, so the warning remains clear when stretched across an entry point.
Benefits
- Repeated BIOHAZARD text and symbol printing separates biological risk areas from normal working zones.
- Non-adhesive PE film can be tied, wrapped, or clipped without surface residue.
- Typical tensile strength of >=15 MPa supports stable use across short restricted areas.
- Elongation of >=200% helps reduce sudden tearing during handling and emergency setup.
- Printing repeat distance of about 300 mm – 1000 mm keeps the message visible from different angles.
- Lightweight rolls allow fast deployment during spill response, cleaning, waste transfer, or room isolation.
- Widths from 50 mm to 75 mm match doors, corridors, benches, and disposal points.
- Custom text, symbol layout, color, thickness, and roll length can be produced for facility procedures.
How Does Bio Hazard Barricade Tape Help Control Contaminated Areas?
Biohazard barrier tape works best as a fast visual control tool. When a spill, sample leak, or contaminated waste movement occurs, staff need a boundary before permanent barriers or deeper cleaning steps are completed. The tape can be placed around the affected area within minutes and removed after the zone is cleared. It does not replace PPE, containment equipment, or facility safety procedures, but it helps reduce accidental entry by making the restricted area obvious.
TDS
| Item | Typical Value |
|---|---|
| Product Type | Biohazard warning barrier tape |
| Material | PE film |
| Tape Structure | Non-adhesive polyethylene tape |
| Printing Content | BIOHAZARD text and biohazard symbol |
| Color Options | Yellow/black, red/white, orange/black, custom |
| Thickness | 0.025 mm – 0.035 mm |
| Width | 50 mm / 70 mm / 75 mm |
| Roll Length | 100 m / 200 m / 500 m |
| Tensile Strength | >=15 MPa typical |
| Elongation | >=200% typical |
| Printing Repeat | 300 mm – 1000 mm |
| Core Size | 76 mm paper core |
| Application Temperature | -10 C – 60 C |
| Adhesive | None |
| Surface Finish | Printed PE film surface |
Applications
- Laboratory contamination control during sample spills, bench cleaning, or equipment decontamination.
- Medical waste isolation areas for infectious waste bins, temporary storage points, and disposal routes.
- Hospital rooms, pathology areas, testing facilities, and cleaning zones requiring restricted access marking.
- Emergency isolation around contaminated corridors, doorways, carts, or treatment support areas.
- Biological material handling points where staff need a clear reminder before entry.
- Temporary separation between clean areas and potentially contaminated working spaces.
What Makes PE Biohazard Barrier Tape Suitable for Laboratory and Medical Waste Applications?
PE film is practical because it is light, flexible, and quick to install without tools. In medical and laboratory spaces, tape often needs to be removed after cleaning, inspection, or waste transfer. Adhesive products can leave marks or require extra cleaning, while non-adhesive PE tape can be tied or clipped in place. For larger waste rooms or corridors, 70 mm or 75 mm widths provide stronger visibility. For bench-level marking or small doors, 50 mm is easier to handle.
FAQ
What is Barricade Tape Bio Hazard used for?
It is used to mark temporary biological risk areas, including laboratories, healthcare rooms, medical waste zones, and contaminated access points.
Is this tape adhesive?
No. It is a non-adhesive PE barrier tape designed to be tied, wrapped, clipped, or fixed to temporary supports.
Can the BIOHAZARD text and symbol be customized?
Yes. Printing layout, warning text, symbol repeat, color, width, thickness, and roll length can be adjusted.
Does biohazard tape provide physical containment?
No. It provides visual identification and temporary access control. It should be used with proper containment, PPE, and safety procedures.