Non Abrasive Anti Slip Tape
OPALUS PACK is a manufacturer of non abrasive anti slip tape for wet, barefoot, and hygiene-sensitive areas where mineral-grit tape may feel too rough or hard to clean. This non-abrasive waterproof anti-slip tape uses a soft textured surface instead of loose abrasive particles, helping improve grip in bathrooms, showers, pools, spa areas, boat decks, food preparation rooms, and clean processing zones where skin comfort, water exposure, low particle shedding, and regular cleaning matter.
- Surface: Non-grit textured film
- Material: PVC, PEVA, or PU
- Adhesive: Waterproof acrylic adhesive
- Colors: Clear, black, white, grey
- Formats: Rolls, strips, discs
- Use Areas: Wet and barefoot zones
Product Features and Benefits
Product Overview
Non Abrasive Anti Slip Tape is the wet-area and easy-clean construction for locations where exposed mineral grit would be too harsh, difficult to clean, or unsuitable for bare-skin contact. An embossed or resilient textured surface can provide grip without the loose grit shedding and deep dirt traps associated with aggressive abrasive coatings.
This positioning is better suited to shower trays, poolside areas, spa floors, locker rooms, boat decks, selected food-preparation areas, and clean processing zones where regular wipe or wash cleaning matters. It should not be positioned as a substitute for heavy-contamination abrasive grades or for foil-backed conformable tape on patterned metal.
Before repeat supply, test the actual substrate for adhesive wet-out, wet exposure, edge stability, residue, surface marking, and cleaning-cycle behavior. Ongoing maintenance should use methods appropriate to the textured non-grit surface; see How to Clean Anti-Slip Tape for the maintenance sequence.
Benefits
- Non-grit grip surface reduces loose particle shedding in clean or food-related areas.
- Softer contact is better for bare feet, wet footwear, shower zones, and poolside areas.
- Lower abrasion helps protect skin, fabrics, wet suits, mops, and cleaning tools.
- Easier cleaning is supported because there are no sharp grit peaks holding dirt.
- Rolls, slit strips, die-cut pads, discs, and shaped pieces can match wet-area layouts.
- Approved samples help compare texture, adhesive grade, color, slit width, and winding quality.
When Should Non Abrasive Anti Slip Tape Be Selected Instead of Grit Tape?
Non abrasive anti slip tape should be selected when slip resistance is needed, but sharp mineral-grit tape would create cleaning, comfort, or hygiene problems. In bathrooms, showers, pool edges, spa areas, locker rooms, and boat decks, people may walk barefoot or with wet footwear, so the tape must grip without scratching skin, swimwear, wet suits, or cleaning tools. It also suits food preparation and clean processing zones where loose grit is a concern.
TDS
| Item | Typical Value |
|---|---|
| Product Type | Non abrasive anti slip tape for wet and barefoot areas |
| Surface Structure | Embossed, soft-touch, or rubber-like textured surface |
| Base Material | PVC, PEVA, or PU film, grade dependent |
| Adhesive Type | Grade-specific pressure-sensitive adhesive; confirm wet-area and removal requirements |
| Total Thickness | Grade specific; confirm approved product specification |
| Common Roll Width | 25 mm, 50 mm, 100 mm, 150 mm, or custom slit width |
| Roll Length | Standard or custom project length; confirm order specification |
| Color Options | Clear, black, white, grey, beige, or matched project color |
| Die-Cut Options | Strips, pads, discs, corner pieces, and shower tray shapes |
| Recommended Substrates | Tile, fiberglass, acrylic, stainless steel, painted metal, coated deck panels |
| Wet-Area Check | Water exposure, wet dwell observation, standing water review, and edge-lifting check |
| Cleaning Compatibility | Mop cleaning, wipe-down, mild detergent, rinse cycle, and appearance confirmation |
| Removal Check | Residue, surface marking, adhesive transfer, and edge seal condition after trial removal |
Applications
- Bathroom floors, shower trays, and wet room walkways
- Swimming pool edges, spa rooms, and hot tub access zones
- Boat decks, marine steps, and watercraft walking surfaces
- Locker rooms, changing rooms, and barefoot public wet areas
- Food preparation rooms where grit shedding is not acceptable
- Clean processing areas requiring easier surface maintenance
How Should Wet-Area Surfaces Be Checked Before Applying Non Abrasive Anti Slip Tape?
Before applying anti slip tape for wet areas, check water exposure, cleaning chemicals, surface texture, drainage direction, and edge-lifting risk. Smooth tiles, fiberglass, stainless steel, acrylic shower trays, boat deck panels, and poolside substrates may behave differently after wetting and cleaning. Apply a small test strip to a dry, degreased area, then review it after water contact, foot traffic, mild detergent wiping, and rinse cycles. For kitchens, spa rooms, and clean areas, also check edge sealing, cleanability, and adhesive residue after removal.
FAQ
1. Is non abrasive anti slip tape suitable for bare feet?
Yes. Its soft textured surface is designed for showers, bathrooms, swimming pools, spa rooms, locker rooms, and boat decks.
2. Can it be cleaned with mops or mild detergent?
Yes. With no loose abrasive particles, the surface is easier to wipe, rinse, or mop. Test detergent and cleaning frequency on site.
3. Does this tape work in food preparation or clean areas?
It can be suitable when low particle shedding and reduced dirt trapping are important. Confirm adhesion, edge sealing, residue, and wet grip first.
4. Can the tape be supplied in different widths or die-cut shapes?
Yes. Options include rolls, slit strips, shower tray pads, discs, and shaped pieces. Width, color, adhesive strength, texture, and sample details can be matched.