Yellow Caution Barricade Tape
OPALUS PACK is a manufacturer of Yellow Caution Barricade Tape made from non-adhesive PE film for temporary safety separation. It is used around construction areas, warehouse maintenance sections, road repair zones, and restricted access points where a clear yellow-and-black visual boundary is needed without adhesive residue. The tape can be tied, clipped, stapled, or fastened to posts, cones, fences, scaffolding, and temporary barriers.
- Material: LDPE / PE film
- Color: Yellow base with black warning print
- Structure: Non-adhesive safety barrier tape
- Thickness: 25um – 80um
- Width: 50mm, 75mm, 100mm, 150mm
- Roll Length: 100m, 200m, 300m, 500m
Product Features and Benefits
Product Overview
Yellow Caution Barricade Tape is not adhesive floor marking tape. It is a lightweight PE warning tape used to create temporary visual boundaries when site conditions change quickly. On construction sites, it can mark excavation edges, wet concrete areas, scaffold access, or unfinished work sections. In warehouses, it separates loading docks, forklift repair spaces, and temporary maintenance zones without damaging floors.
The non-adhesive barricade tape structure makes installation fast. Workers pull the tape from the roll and secure it to fixed points by tying, clipping, stapling, or fastening. No surface cleaning is required, and removal is clean. This is useful when a work zone shifts several times during one project.
Thickness affects field performance. Lighter 25um – 40um grades work for short indoor separation or low-contact marking. For outdoor construction and road maintenance, 50um – 80um PE film is usually preferred because it handles longer spans, wind movement, and repeated pulling better. A 100m roll suits small maintenance tasks, while 300m or 500m rolls reduce roll changes on larger temporary barrier marking projects.
During production, OPALUS PACK checks film thickness consistency, winding tension, edge trimming, and print clarity. These details influence smooth unwinding, edge splitting during tying, and warning print readability after handling.
Benefits
- High-visibility yellow background and black warning print make the boundary easier to notice in dusty, busy, or open working areas.
- Non-adhesive PE film avoids glue residue and allows quick repositioning when temporary work zones move.
- Width options from 50mm to 150mm support different viewing needs. The 75mm and 100mm sizes are common for construction and road work because they balance visibility and handling.
- Controlled film thickness helps reduce weak points along the roll, lowering breakage from sharp pulling, tight knots, or repeated repositioning.
- UV-stabilized material options help maintain yellow color and black print contrast during outdoor exposure.
- Even roll winding supports faster deployment when marking long safety boundaries.
How Does Yellow Caution Barricade Tape Perform in Outdoor Work Areas?
Outdoor performance depends on visibility, film strength, and installation method. For construction barricade tape used near scaffolding, roadside repair, or open warehouse yards, thicker PE film gives better handling strength than very thin temporary marking film. Proper fixing also matters. A loose tie can cause sagging, while an overly tight knot may create a tearing point. The tape should be fixed with steady tension and supported at reasonable intervals.
TDS / Technical Data Sheet
| Item | Typical Value |
|---|---|
| Product Type | Yellow non-adhesive barricade tape |
| Material | LDPE / PE film |
| Color | Yellow base with black warning printing |
| Film Structure | Single-layer PE or co-extruded PE film |
| Adhesive | No adhesive |
| Thickness | 25um – 80um |
| Common Width | 50mm, 75mm, 100mm, 150mm |
| Roll Length | 100m, 200m, 300m, 500m |
| Printing Method | Surface printed warning text |
| Tensile Performance | Industrial PE film with controlled stretch |
| Elongation | Flexible PE film elongation characteristics |
| Outdoor Option | UV-resistant grade available |
| Temperature Range | -10 C to 60 C typical use condition |
| Fixing Method | Tie, clip, staple, or fasten to posts and barriers |
| Main Use | Temporary construction, warehouse, and road maintenance separation |
Applications
- Construction sites: excavation edges, scaffold access, unfinished work sections, and temporary restricted areas.
- Warehouse areas: loading docks, machine maintenance spaces, forklift repair areas, and short-term no-entry zones.
- Road maintenance zones: roadside repair, lane-side work, utility maintenance, and pedestrian diversion areas.
- Industrial work areas: equipment service zones, cleaning areas, temporary hazard points, and short-term access control sections.
What Specifications Should Be Checked Before Selecting This PE Warning Tape?
The key specifications are thickness, width, roll length, and outdoor exposure requirement. A 50mm tape can work for short indoor use, while open construction or road maintenance areas often use 75mm or 100mm width for better visibility. If the tape will be tied between posts or exposed to wind, 50um – 80um thickness gives more stable handling. For larger areas, longer rolls help keep the boundary continuous with fewer roll changes.
FAQ
Is Yellow Caution Barricade Tape adhesive?
No. It is a non-adhesive PE safety barrier tape fixed by tying, clipping, stapling, or fastening to cones, posts, fences, or temporary barriers.
What thickness is better for outdoor construction use?
For outdoor construction and road maintenance, 50um – 80um PE film is commonly selected for better tear resistance during pulling, tying, and wind exposure.
Can it be used in warehouses?
Yes. It can temporarily separate loading areas, maintenance zones, forklift repair spaces, and short-term restricted sections.
What is the common width for job site use?
75mm and 100mm are common because they balance visibility, roll handling, and installation speed.