Barrier Tape Red White
OPALUS PACK is a manufacturer of barrier tape red white for temporary safety marking, restricted area identification, and outdoor perimeter control. Made from flexible PE or LDPE film, this non adhesive barrier tape uses a clear red-white contrast to make temporary boundaries easier to recognize on construction sites, roadworks, maintenance areas, and facility zones. Standard 75mm rolls are available in 100m and 500m lengths, with controlled thickness, stable roll dimensions, and batch color consistency for industrial supply.
- Size: 75mm x 100m / 75mm x 500m
- Color: Red / White striped pattern
- Material: PE / LDPE film
- Structure: Non adhesive roll tape
- Thickness: 0.05mm-0.12mm typical range
- Use: Temporary area isolation and safety boundary marking
Product Overview
Product Overview
Barrier tape red white is designed for work areas where a fast, visible, and temporary boundary is needed. The alternating red and white pattern is not only decorative. On busy sites, the contrast helps people notice a boundary quickly, even when vehicles, tools, workers, and stored materials are moving around the area.
The tape is produced from PE or LDPE film, normally controlled within a 0.05mm-0.12mm thickness range. This range keeps the roll light enough for quick handling while giving the film enough body for tying, hanging, and temporary outdoor separation. The 75mm width is a practical industrial size: wide enough to be seen from a distance, but still easy to pull, knot, and install between cones, posts, scaffolding, or temporary fencing.
As a red white barricade tape, the product is useful when the boundary may change during the day. It can be removed or repositioned without adhesive residue, which matters around equipment repair zones, finished floors, temporary walkways, and site entrances.
Benefits
- Red-white contrast gives a clear boundary signal for short-term restricted areas, helping separate people from repair work, excavation edges, or unsafe pathways.
- Non adhesive PE film can be tied or fixed in place without leaving residue on walls, equipment, floors, or temporary supports.
- 75mm x 100m rolls are convenient for smaller maintenance tasks, while 75mm x 500m rolls reduce roll changes during larger perimeter marking work.
- Typical tensile strength of 18-30 MPa helps the tape stay stable during normal installation between cones, posts, and site barriers.
- Elongation of 150-300% allows the film to absorb light stretching during setup without breaking too easily under normal handling.
- Stripe alignment and color consistency are checked during production, so repeated orders keep the same red-white recognition across large work areas.
What Does Red White Barrier Tape Indicate in Temporary Work Areas?
Red white barricade tape is commonly used to mark areas where people should slow down, avoid entry, or follow site instructions. The color combination creates a stronger visual warning than plain white or single-color film, especially around excavation work, repair zones, restricted pathways, and temporary construction boundaries. Its value is not only the color itself, but the speed of setting up a visible boundary without installing a fixed fence.
TDS / Technical Data Sheet
| Item | Typical Value |
|---|---|
| Product Type | Red white non adhesive barrier tape |
| Material | PE / LDPE film |
| Standard Width | 75mm |
| Roll Length | 100m / 500m |
| Thickness | 0.05mm-0.12mm |
| Tensile Strength | 18-30 MPa |
| Elongation at Break | 150-300% |
| Color Pattern | Red / White diagonal stripes |
| Length Tolerance | +/-2% |
| Structure | Non adhesive roll film |
| Temperature Resistance | -20C to +60C |
| UV Resistance | Optional UV stabilized grade |
| Application | Temporary safety boundary and restricted area marking |
Applications
- Temporary construction site boundary marking
- Road maintenance and utility repair area separation
- Outdoor warning tape for short-term perimeter control
- Warehouse maintenance zones and restricted aisle marking
- Excavation, trench, and equipment repair area identification
- Facility shutdown areas where access needs to be controlled
- Event access control and temporary crowd direction
- Equipment service zones where fixed barriers are not required
- Temporary safety barrier tape for frequently changing work areas
How Does Non Adhesive Barrier Tape Perform Outdoors?
For outdoor use, the performance of a temporary safety barrier tape depends on film thickness, installation tension, sunlight exposure, and how long the boundary needs to remain in place. Standard polyethylene warning tape works well for short-term outdoor marking, while UV-stabilized grades are better for repeated or longer exposure. In windy areas, the tape should be fixed with enough slack to reduce tearing while still keeping the red-white pattern visible. For open perimeters, 500m rolls are usually more efficient because fewer roll changes are needed during continuous installation.
FAQ
Is barrier tape red white adhesive or non adhesive?
It is normally supplied as a non adhesive PE or LDPE roll film. It is designed to be tied, wrapped, or fixed between temporary supports rather than stuck to a surface.
What roll size is commonly used for red white barrier tape?
The most common industrial options are 75mm x 100m and 75mm x 500m. Shorter rolls are easier for small maintenance tasks, while 500m rolls are more efficient for larger perimeter layouts.
Can this polyethylene warning tape be used outdoors?
Yes. It can be used outdoors for temporary marking. For longer sunlight exposure, UV-stabilized film is recommended to help maintain color visibility.
What should be checked before bulk supply?
Important checks include film thickness, tensile strength, roll length tolerance, stripe clarity, roll winding, and batch-to-batch color consistency.